Poli-Flex® Glitter

Technical Data: Transfer Film: Effect film / Adhesive: Polyurethane-hotmelt / Thickness [mm]: 0,11 +/- 5 % / Liner: PET-film, self-adhesive Transfer Conditions: Temperature: 160 °C / Pressure: 3,5 bar [medium pressure] / Time: 15 sec. Wash resistance: 60 °C / Suitable for tumble dry and dry-cleaning; Perchloroethylene (Tetrachloroethylene), Wash textile inside out POLI-FLEX® GLITTER is a thermally transferable flex film and is suitable to transfer onto textiles like cotton, mixtures of polyester/cotton and polyester/acrylic POLI-FLEX® GLITTER can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles POLI-FLEX® GLITTER can be cut with all current plotters. We recommend using a standard blade (45°). Once it has been weeded, the cut flex film is transferred using a transfer press. The PET liner should be removed warm POLI-FLEX® GLITTER is covered with a self-adhesive PET liner, enabling the possibility to reposition the motive Nylon and textiles with hydrophobic impregnation are not suitable for heat transfer. In this case, L-Flex Nylon should be used. If the specified temperature and pressure requirements are not met during the heat transfer printing process, secure and permanent adhesion of the flex film cannot be guaranteed. We recommend carrying out an application test on original materials. Due to the various influences resulting from the production and transfer of the transfer film, the nature of the materials and the washing and cleaning conditions, product liability can only apply to unprocessed materials.