Poli-Flex® 4781 Reflex Silver 3M

Technical Data: Transfer Film: Effect-film, retro-reflective / Adhesive: Copolyester-hotmelt / Thickness [mm]: 0,16 +/- 5 % / Liner: PET-film, self-adhesive Transfer Conditions: Temperature: 160 °C / Pressure: 3,5 bar [medium pressure] / Time: 15 sec. Wash resistance: 60 °C / Suitable for tumble dry / Wash textile inside out POLI-FLEX® REFLEX SILVER 3M is a silver transfer film with retro-reflective properties and suitable to transfer onto textiles like cotton, uncoated nylon, blends of polyester/cotton and polyester/acrylic POLI-FLEX® REFLEX SILVER 3M can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles The reflective layer consists of metallised glass microspheres that are coated with a heat-activated adhesive on the back. Due to the lamination of a transparent PET film on the reflective side, the film can be cut with all current plotters. We recommend using a standard blade (45°). Once it has been weeded, the cut flex film is transferred using a transfer press. Remove the PET film while warm. Nylon and textiles with hydrophobic impregnation are not suitable for heat transfer. In this case, L-Flex Nylon T500 should be used. POLI-Flex® REFLEX SILVER 3M consists of directly mirrored, open glass balls. The photometric values (minimum retroreflecting values) comply with the standard EN ISO 20471:2013. If the specified temperature and pressure requirements are not met during the heat transfer printing process, secure and permanent adhesion of the flex film cannot be guaranteed. We recommend carrying out an application test on original materials. Due to the various influences resulting from the production and transfer of the transfer film, the nature of the materials and the washing and cleaning conditions, product liability can only apply to unprocessed materials.