Turbo Print 4010-S Blockout

Technical Data: Transfer Film: Polyurethane, cast with a blockout interlayer Adhesive: Polyurethane-hotmelt Thickness in [mm]: 0.12 +/- 5% Liner: PET-film, self-adhesive Transfer Conditions: Temperature: 130 °C Pressure: 2.5–3.0 bar [average pressure] Time: 5 sec. Wash resistance: 60 °C Only use colour or mild detergent Wash textile inside out Printing: True sided Sublimation resistant, printable Polyurethane film (white) with a blockout interlayer Suitable for bright and dark textiles The film possesses a soft textile touch After the thermal transfer, a semi-matt finish with high resolution is achieved TURBO PRINT 4010-S BLOCKOUT is compatible with all current printers using ECO-solvent, solvent and latex inks Due to self-adhesive PET film liner, even very small letters and motifs can be cut by all current CAD/CAM plotters after the printing process To avoid a sublimationmigration we recommend that the garment is not pre-heated After heat-transfer we recommend removing the PET-liner warm We recommend the application tape POLI-TACK 854 + 870 for transfer TURBO PRINT 4010-S BLOCKOUT is suitable for transfer to textiles like cotton, polyester, uncoated nylon, mixtures of polyester/cotton and polyester/acrylic Waterproof nylon fabrics should be tested for suitability before carrying out transfers The transfer film is used for motifs and logos on sport, leisure and work wear We recommend to carry out an application test on original materials Due to the various influences resulting from the production and transfer of the transfer film, the nature of the materials and the washing and cleaning conditions, product liability can only apply to unprocessed materials.